ODIN POWER CORD
The Odin Power Cord applies Nordost's TSC (Total Signal Control) technology to significantly advance the audio performance AC wiring. It uses seven, close tolerance 15 AWG, 99.999999% oxygen free copper conductors, each covered by an 85 micron layer of extruded silver, suspended in a Dual Mono-Filament matrix and enclosed in the TSC shield. The result is a new level in efficiency of power transmission coupled with superb mechanical damping and rejection of external RFI/EM interference.
The separate, solid core conductors eliminate strand interaction, hot spots and other artifacts that can degrade performance, while the extreme precision with which the TSC tubes are manufactured and arranged ensures complete consistency in performance. Let Odin feed your system and get ready for improved noise floor and resolution, increased transparency and dynamic range and more natural, breathtaking range of tonal colors. Suddenly the music will step away from the system producing it, taking on a life of its own, thanks to the improved speed and clarity of power on which your system depends.
|Insulation:||High purity class 1.003 extruded Fluorinated Ethylene Propylene (FEP)|
|Construction:||Mechanically tuned spacing, length and Dual Mono-Filament, TSC design|
|Conductors:||7 x 15 AWG|
|Material:||Silver-plated 99.999999% solid core OFC|
|DC Resistance:||1.33 Ohms per 1000ft|
|Cable Power Rating:||20 Amp|
|Overall Shield Coverage:||100% Individually shielded total coverage|
|Velocity of Propagation:||88%|
||Furutech rhodium-plated US (Nema), EU (Schuko), AUS or UK (Furutech) to IEC-C15 or IEC-C19|